USB Charging Port Controller and Load Detection Power Switch
Log in or register to manage email notifications about changes to datasheets or PCNs for this part.
The PI5USB2546J is a USB charging port controller and power switch with an integrated USB 2.0 high-speed data line (D+/D–) switch. The PI5USB2546J provides the electrical signatures on D+/D– to support charging schemes listed under device feature section. This series is compatible with
both popular BC1.2 compliant and non-BC1.2 compliant devices. The PI5USB2546J fully supports system wake up (from S3) with a mouse/keyboard (both low speed and full speed). The
PI5USB2546J also supports two distinct power management features, namely, power wake and port power management (PPM) through /STATUS pin. Power wake allows for power
supply control in S4/S5 charging and PPM manages port power in a multi-port application. The PI5USB2546J 73-mΩ power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. Two programmable current thresholds provide flexibility for setting current limits and load-detect thresholds.
Type | USB Charger |
---|---|
AEC Qualified | No |
Compliance (Only Automotive supports PPAP) | Standard |
Maximum Continuous Output Current (A) | 2 |
(MAX) Maximum Current Limit Fixed (A) | Adjustable |
Adjustable Current Limit | Yes |
Channels | 1 |
Enable Logic | Active High |
Minimum Operating Voltage (V) | 4.5 |
Maximum Operating Voltage (V) | 5.5 |
Quiescent Current Typ (µA) | 240 |
RDS(ON) (VIN = 5V) Typ (mΩ) | 73 |
Reverse Current Block | Yes |
Minimum Power Supply Voltage (V) | 4.5 |
Maximum Power Supply Voltage (V) | 5.5 |
Output Discharge | Yes |
(TYP) Output Rise Time mS | 1 |
OCP Output Latch Off | No |
OCP Flag | Yes |
Power Good | No |
Operating Ambient Temperature Range (°C) | -40 to 85 |
Overtemperature Protection | Yes |
UL Certificate | Yes |