Diodes Menu Close
Diodes Pericom: A product line of Diodes Incorporated

展频晶体振荡器 (SSXO)

SSXO

此系列 Diodes XO 产品提供展频功能,可让设计具备低电磁干扰 (EMI) 的特性。SSXO 使用独家 PLL 及展频频率产生器 (SSCG) 技术,以合成和调变输入石英晶体的频率。并使基频谐振波频率的辐射能量减少,以符合电磁兼容性 (EMC) 要求。原厂内部设定功能提供弹性的输出频率、调变速率及展频比率选项。

展频晶体振荡器 (SSXO) Details

  • Wide frequency range – 16-67 MHz
  • Flexible spread options – Center Spread, Down Spread
  • Flexible modulation rate option
  • Very low power consumption – 6 mA max for 2.5 V VDD, 10 mA max for 3.3 V VDD
  • Industry standard low profile packages – 3.2 x 2.5 mm, 5.0 x 3.2 mm, 7.0 x 5.0 mm

Applications

  • Multi-function printers
  • Wire and wireless networking devices
  • Media players
  • LCD panel
  • Digital television
  • Video surveilance

展频晶体振荡器 (SSXO) FAQs

Define Stability?

Parameter used to define the maximum deviation of the actual frequency from the specified nominal frequency over changes in operating conditions. Oscillator stability is usually rated as inclusive of temperature, load, initial calibration, supply, and aging effects.

Is there a replacement for an obsolete part?

Not all obsolete parts will have a direct replacement. However, we recommended that you contact your regional sales office.

What are the types of jitter?

There are several types of jitter, but the main ones are: cycle-to-cycle jitter, period jitter, half period jitter, and peak-to-peak jitter. Jitter terminology can be found in AB36: Jitter Measurement Techniques at Application Brief No. 36 or Application Note No. 27.

What is cycle-to-cycle jitter?

Cycle-to-cycle jitter is the difference in the clock's period between two consecutive cycles and is expressed in units of + pico-seconds. This is because it can be either leading or lagging from the ideal output waveform.

What is half-period jitter?

Half-Period Jitter is the measure of maximum change in a clock's output transition from its ideal position during one-half period. It is measured as: tjit(half-period) = thalf-period n – 1/2 ƒo, where ƒo is the frequency of the input signal.

What is Jitter?

Measurement of the deviation of a clock period from its ideal position as calculated with respect to the average operating frequency under a fixed set of operating conditions.

What is PPM?

Part per million is used to measure the deviation of the output signal (+/-20 ppM = +/-0.002%).

What is the lead finish for Pericom products? What about lead-free?

All Pericom's products that are not lead-free are composed of 85% Sn and 15% Pb. For lead-free products, they are composed of 100% matte Sn. Lead-free products are marked and ordered with the letter "E" suffix at the end of the part number.

What is XO or SO?

A crystal (or SAW) oscillator outputs a precise fixed-frequency clock signal at a specified nominal value, used for data and processor timing.

Where can I find Mean Time Before Failure (MTBF) or Failures In Time (FIT) values for Pericom products?

FIT and MTBF data can be found at Pericom's Quality webpage.

Where can I find the information on your Pb-free and "Green" packaging?

Lead (Pb)-Free and Green information can be found on individual datasheets or Pb-Free & Green Page.

Why is the marking on the FCT devices different from the datasheet?

Sometimes the speed grades and the package nomenclature for our FCT devices may be swapped around. Full explanation for nomenclature information can be found under Packaging Support Documentation.