Diodes Incorporated — Analog and discrete power solutions
Back to Universal Level Shifter / Voltage Translation (ULS)

PI6ULS5V9517A (Not Recommended for New Design (NRND))

NRND = Not Recommended for New Design

Level Translating I2C Bus/SMBus Repeater

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Product Description

The PI6ULS5V9517A is a CMOS integrated circuit intended for I2C-bus or SMBus applications. It can provide level shifting between low voltage (down to 0.8 V) and higher voltage (2.2V to 5.5V) in mixed-mode applications. And it enables I2C and similar bus system to be extended, without degeradation of peformance even during level shifting.

The PI6ULS5V9517A enables the system designer to isolate two halves of a bus for both voltage and capacitance, accommodating more I2C devices or longer trace length. It also permits extension of the I2C-bus by providing bidirectional buffering for both the data (SDA) and the clock (SCL) lines, thus allowing two buses of 400 pF to be connected in an I2C application. 

Features

  • 2 channel, bidirectional buffer
  • I2C-bus and SMBus compatible
  • Port A operating supply voltage range of 0.8 V to 5.5 V
  • Port B operating supply voltage range of 2.2 V to 5.5 V
  • Voltage level translation from 0.8 V to 5.5 V and from 2.2 V to 5.5 V
  • Active HIGH repeater enable input
  • Open-drain input/outputs
  • Lock-up free operation
  • Supports arbitration and clock stretching across the repeater
  • Accommodates Standard-mode and Fast-mode I2C-bus devices and multiple masters
  • Powered-off high-impedance I2C-bus pins
  • 5.5 V tolerant I2C-bus and enable pins
  • 0 Hz to 400 kHz clock frequency (the maximum system operating frequency may be less than 400 kHz because of the delays added by the repeater)
  • ESD protection exceeds 8KV HBM per JESD22- A114
  • Package: MSOP-8L, SOIC-8L and TDFN2x3-8L 

Product Specifications

Product Parameters

Compliance (Only Automotive supports PPAP) Standard
Translation From (V) 0.8 to 5.5
Translation To (V) 2.2 to 5.5
Max Signal Rate 400kHz
Bits Needed 2
Auto Direction Sensing? Yes
Shift Bi-Directional
Ambient or Junction Temperature (°C) -40 to 85

Technical Documents

Design tool model software

Recommended Soldering Techniques

TN1.pdf

Additional Technical Documents are available upon request:
Application information, Evaluation board, and Other technical documents

Request Documents

Product Change Notices (PCNs)

A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

PCN # Issue Date Implementation Date Subject
PCN-2642 2023-09-05 2024-03-05 Device End of Life (EOL)
PCN-2510 2021-02-26 2021-05-26 Qualified Additional A/T Sites, Fab Site and Data Sheet Change
PCN-2505 2021-01-26 2021-07-26 Device End of Life (EOL)