Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details. SOT363
IDEAL DIODE CONTROLLER
Contact Sales
Log in or register to manage email notifications about changes to datasheets or PCNs for this part.
The DZDH0401DW is intended to drive a p-channel enhancement MOSFET configured as an ideal diode. The device operates as a differential amplifier and PMOS controller to minimize forward current losses when VIN > VOUT and provide high isolation when VIN < VOUT. The circuit compares the voltage between IN and OUT. If the differential is greater than ~34mV (typ.) VBIAS will fall and the PMOS will turn on, If the differential is less than ~70mV VBIAS will rise and the PMOS will turn
off, isolating IN from OUT.
| Disconnect Timing Delay (td) typ (μs) | 200 |
|---|---|
| Compliance (Only Automotive Supports PPAP) | Standard |
| @ conditions | Rref = 100k; Rbias = 1M; Isupply = 3A; Vbat=14V |
| Category | Ideal Diode Controller |
| IBIAS max (mA) | -300 |
| IDRAIN max (mA) | 300 |
| IREF max (mA) | -300 |
| ISOURCE max (mA) | 300 |
| Vin (Max) (V) | 40 |
| Vout (max) | 40 |
| VSOURCE-DRAIN Typ Blocking (V) | 84 |
A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.
| PCN # | Issue Date | Implementation Date | Subject |
|---|---|---|---|
| PCN-2691 | 2024-08-16 | 2024-11-14 | Additional Wafer Sources and Transfer of Wafer Manufacturing Site for Select Discrete Products |
