Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details. V-DFN2020-8 (Type F)
Single Channel Smart Load Switch
Contact Sales
Log in or register to manage email notifications about changes to datasheets or PCNs for this part.
The DML3006LFDS load switch provides a component and area-reducing solution for efficient power domain switching with inrush current limit via soft-start. In addition to integrated control functionality with ultra-low on-resistance, this device offers system safeguards and monitoring via fault protection and power-good signaling. This cost-effective solution is ideal for power management and hot-swap applications requiring low power consumption in a small footprint.
Type |
Load Switch |
|---|---|
AEC Qualified |
No |
Compliance (Only Automotive Supports PPAP) |
Standard |
Quiescent Current Typ (μA) |
310 |
Maximum Continuous Output Current (A) |
11 |
(MAX) Maximum Current Limit Fixed (A) |
Not Limited |
Adjustable Current Limit |
No |
Channels |
1 |
Enable Logic |
Active High |
Minimum Operating Voltage (V) |
0.5 |
Maximum Operating Voltage (V) |
13.5 |
RDS(ON) (VIN = 5V) Typ (mΩ) |
8.6 |
Reverse Current Block |
No |
Minimum Power Supply Voltage (V) |
3 |
Maximum Power Supply Voltage (V) |
5.5 |
Output Discharge |
Yes |
(TYP) Output Rise Time mS |
0.1 |
OCP Output Latch Off |
No |
OCP/SCP |
SCP |
OCP Flag |
No |
Power Good |
open drain |
Overtemperature Protection |
Yes |
UL Certificate |
No |
Something went wrong with your request. Please try again later. If this problem continues, please contact Diodes support for assistance.
A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.
| PCN # | Issue Date | Implementation Date | Subject |
|---|---|---|---|
| PCN-2770 | 2025-10-30 | 2025-10-30 | Add Fab Site Code, Country of Diffusion (COD) and Assembly Site Origin (ASO) on Product and Shipping Labels for all Diodes Products |
| PCN-2495 | 2021-03-31 | 2021-07-01 | Qualification of Additional Assembly & Test Sites and Additional Wafer Back Grinding and Back Metal Process Source for Select Discrete Products |
