ESD-Protected, Low Capacitance, 2-Channel, 2:1 Switch, With Powered-off Protection
Log in or register to manage email notifications about changes to datasheets or PCNs for this part.
PSMUX154 is a High-bandwidth dual fast single-pole double throw (SPDT) CMOS switch. It can be used as an analog switch or as a low-delay bus switch. Specified over a wide operating power supply voltage, 1.8V to 4.3V, the PSMUX154 has an On-Resistance of 4.3Ω at VDD = 3.0V. Break-before-make switching prevents both switches being enabled simultaneously. This eliminates signal disruption during switching.
Compliance (Only Automotive Supports PPAP) |
Standard |
|---|---|
Configuration |
2-Channel SPDT |
Differential Channels |
0 |
HotInsertion |
No |
Lanes |
N/A |
OtherFeatures |
N/A |
Rail-to-Rail |
Yes |
Signal Type |
Single Ended |
Single Ended Channels |
2 |
Type |
SPDT |
Voltage |
1.8V to 4.3V |
Additional Technical Documents are available upon request:
Application information, Evaluation board, and Other technical documents
Something went wrong with your request. Please try again later. If this problem continues, please contact Diodes support for assistance.
A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.
| PCN # | Issue Date | Implementation Date | Subject |
|---|---|---|---|
| PCN-2770 | 2025-10-30 | 2025-10-30 | Add Fab Site Code, Country of Diffusion (COD) and Assembly Site Origin (ASO) on Product and Shipping Labels for all Diodes Products |