Diodes’ PI3WVR648 is a four-data-lane MIPI switch. This 10 channel single-pole, double-throw (SPDT) switch is optimized for switching between two high-speed (HS) or low-power (LP) MIPI signal. The PI3WVR648 is designed for the MIPI specification and allows connection to CSI/DSI, C-PHY/D-PHY module.
– 36-Pin, WLCSP (GEA)
Compliance (Only Automotive Supports PPAP) |
Standard |
|---|---|
Analog or Digital? |
Analog |
Configuration |
SPDT |
Differential Channels |
10 |
Lanes |
5 |
Signal Type |
Differential |
Control Interface/Protocols |
D-PHY/C-PHY |
Voltage(V) |
1.5 to 5.0 |
Ron (Typ) (Ω) |
5 |
Icc (Typ) (µA) |
15 |
Ambient or Junction Temperature (°C) |
-40 to 85 |
Something went wrong with your request. Please try again later. If this problem continues, please contact Diodes support for assistance.
A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.
| PCN # | Issue Date | Implementation Date | Subject |
|---|---|---|---|
| PCN-2770 | 2025-10-30 | 2025-10-30 | Add Fab Site Code, Country of Diffusion (COD) and Assembly Site Origin (ASO) on Product and Shipping Labels for all Diodes Products |
Contact Sales