Ultra-High Voltage Protection USB2 1:2 Mux/DeMux
Log in or register to manage email notifications about changes to datasheets or PCNs for this part.
The PI3USB4000A is a 2-to-1 differential channel multiplexer/demultiplexer switch. C0+/C0- pins can tolerate voltages up to 18V. Over-voltage protection (OVP) is implemented at 4.75V to immediately switch off the channels when over-voltage condition is detected. PI3USB4000A can pass USB2.0 signal with bandwidth 1GHz to maintain signal integrity and eye diagram open.
Compliance (Only Automotive Supports PPAP) |
Standard |
---|---|
Analog or Digital? |
Analog |
Configuration |
1 Differential Channel 2:1 |
Differential Channels |
1 |
HotInsertion |
No |
Lanes |
1 |
OtherFeatures |
N/A |
Rail-to-Rail |
N/A |
Signal Type |
Differential |
Single Ended Channels |
No |
Type |
SPDT |
Voltage |
3.3 |
Additional Technical Documents are available upon request:
Application information, Evaluation board, and Other technical documents
Something went wrong with your request. Please try again later. If this problem continues, please contact Diodes support for assistance.