300MA High PSRR Low Noise LDO with ENABLE
Log in or register to manage email notifications about changes to datasheets or PCNs for this part.
Iq (typ) (µA) |
35 |
---|---|
Iq (max) (µA) |
50 |
Operating Ambient Temperature (°C) |
-40 to 85 |
AEC Qualified |
No |
Compliance (Only Automotive Supports PPAP) |
Standard |
Type |
LDO |
Output options |
Fixed |
Iout (A) |
0.3 |
Vin (Max) (V) |
5.25 |
Vin (Min) (V) |
1.7 |
Vout (min) |
1.1 |
Vout (max) |
3.3 |
Fixed Vout (V) |
1.1, 1.2, 1.5, 1.8, 1.85, 2.2, 2.5, 2.8, 2.85, 3.0, 3.1, 3.2, 3.3 |
Accuracy 25C |
1 |
Noise uV RMS 10-100 kHz |
60 |
VDROPOUT (Max) (V) at Max Current and Max Ouput Voltage |
0.4 |
PSRR (dB) 1kHz |
75 |
Enable Active |
Yes (High) |
Channels |
1 |
Output Discharge |
Yes, No |
Power Good |
No |
Reverse Protection |
No |
VCTL Function |
No |
Something went wrong with your request. Please try again later. If this problem continues, please contact Diodes support for assistance.
A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.
PCN # | Issue Date | Implementation Date | Subject |
---|---|---|---|
PCN-2648 | 2023-10-19 | 2024-01-20 | Additional Wafer Source SPFAB |