Diodes Incorporated — Analog and discrete power solutions
SOT25

Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details. TSOT25

Back to AP22816B

AP22816B

1.0A/1.5A/2.0A Single Channel Power Distribution Load Switch

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Description

The AP22816/17/18 is a single-channel, current-limited, integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB standards and is available with both polarities of enable input. The device has fast short-circuit response time for improved overall system robustness, and has an integrated output discharge function to ensure completely controlled discharging of the output voltage capacitor. They provide a complete protection solution for applications subject to heavy capacitive loads and the prospect of short circuit, and offer reverse current blocking, overcurrent, overtemperature and short-circuit protection, as well as controlled rise time and undervoltage lockout functionality. A 6ms deglitch capability on the open-drain flag output prevents false overcurrent reporting and does not require any external components. The AP22816/17/18 is available in the standard Green and RoHS compliant TSOT25 and MSOP-8 packages.

Feature(s)

  • Input Voltage Range: 2.7V to5V
  • 75mΩ On-Resistance
  • Built-In Soft-Start with 0.6ms Typical Rise Time
  • Fault Report (FLG) with Blanking Time (6ms Typ.)
  • Logic Level Enable Pin: Available with Active-High or Active-Low Versions
  • Protections:
    • ESD Protection: 2kV HBM, 500V CDM
    • Overcurrent Protection with Auto-Recovery
    • Short-Circuit Protection with Auto-Recovery
    • Overtemperature Protection with Auto-Recovery
    • Output Reverse Current / Voltage Protection
  • Thermally Efficient Low Profile Package
  • Moisture Sensitivity: Level 1 per J-STD-020
  • Terminals: Finish–Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208
  • Weight:
    • TSOT25: 0.013 grams (Approximate)
    • MSOP-8: 0.027grams (Approximate)
  • Totally Lead-Free & Fully RoHS Compliant
  • Halogen and Antimony Free. “Green” Device
  • For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/product-definitions/

Application(s)

  • Integrated Load Switches in Ultrabook PCs
  • Power Up/Down Sequencing in Ultrabook PCs
  • Notebooks
  • Netbooks
  • Set-Top Boxes
  • SSD (Solid State Drives)
  • Consumer Electronics
  • Tablet PCs
  • Telecom Systems

Specifications & Technical Documents

Product Parameters

Type

OCP Switch

AEC Qualified

No

Compliance (Only Automotive Supports PPAP)

Standard

Quiescent Current Typ (μA)

80

Maximum Continuous Output Current (A)

1

(MAX) Maximum Current Limit Fixed (A)

2.1

Adjustable Current Limit

No

Channels

1

Enable Logic

Active Low

Minimum Operating Voltage (V)

2.7

Maximum Operating Voltage (V)

5.5

RDS(ON) (VIN = 5V) Typ (mΩ)

75

Reverse Current Block

Yes

Minimum Power Supply Voltage (V)

2.7

Maximum Power Supply Voltage (V)

5.5

Output Discharge

Yes

(TYP) Output Rise Time mS

2.1

OCP Output Latch Off

No

OCP Flag

Yes

Power Good

No

Overtemperature Protection

Yes

UL Certificate

Yes

Related Content

Packages

Technical Documents

Certificate

Recommended Soldering Techniques

TN1.pdf

RoHS CofC

Purchase & Availability

Something went wrong with your request. Please try again later. If this problem continues, please contact Diodes support for assistance.

Product Change Notices (PCNs)

A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

PCN # Issue Date Implementation Date Subject
PCN-2770 2025-10-30 2025-10-30 Add Fab Site Code, Country of Diffusion (COD) and Assembly Site Origin (ASO) on Product and Shipping Labels for all Diodes Products
PCN-2648 2023-10-19 2024-01-20 Additional Wafer Source SPFAB