Diodes Incorporated — Analog and discrete power solutions

Description

The PI3DPX1203 is DisplayPort compliant, 8Gbps link speed, single differential channel Linear ReDriver with Link Training transparent mode. Since DisplayPort source and sink-side device are unaware of the Linear ReDriver, they never generate AUX link training transactions, and pass through all the AUX transactions between source and sink-side devices. PI3DPX1203 provides programmable input equalization, linear swing and flat gain control to optimize output over a variety of physical mediums by reducing intersymbol interference. The integrated linear equalization circuitry  provides flexibility with signal integrity of the signal before  and after the ReDriver. A low level input signal detection and output squelch function is provided.

Applications

  • PCs and Peripherals
  • DisplayPort Active cables

Features

  • DisplayPort standard 1.3 Compliant Linear ReDriver
  • Support flexible placement for Active cable, Sink
    and Source side
  • Ideal for USB Type-CTM sink and source-side app-
    lication with PD controllers
  • Transparent DisplayPort link training. No need Aux
    Link training listener circuits
  • Low latency transparent for the DisplayPort link
    training allow for Sink-side application
  • Linear input equalization increases link margin
    for systems implementing Decision Feedback
    Routing Equalizers (DFE)
  • Independent channel configuration of input
    equalization, output swing and flat gain
  • Pin strap or I2C programmable for device
    configuration setting
  • Channel order swap and polarity swap support
    Aux channel connect directly from source to sink
    device
  • 4-bit selectable address bit for I2C port
  • Supply Voltage: 3.3V
  • Package : 42-pin TQFN (3.5mm x 9mm)

Product Change Notices (PCNs)

A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

PCN # Issue Date Implementation Date Subject
PCN-2672 2024-03-11 2024-09-07 Device End of Life (EOL)
PCN-2493 2020-12-28 2021-03-28 Qualified Additional A/T Sites and Bill of Materials (BOM)
PCN-2328 2018-04-12 2018-10-12 Device End of Life for tray packaging only