USB 3.2 Gen 1 and USB 2 .0 Combo Switch
Log in or register to manage email notifications about changes to datasheets or PCNs for this part.
The PI3USB3102 USB 3.2 Gen 1 and USB2.0 Combo Switch is a complete 1:2 switching solution for SuperSpeed USB 3.2 Gen 1 signals. The PI3USB3102 provides differential high-speed lanes for the USB 3.2 Gen 1 4.8 Gbps TX and RX lanes as well as a differential lane for 480 Mbps USB 2.0 signals and the USB_ID signal. The PI3USB3102 can be used to connect two hosts to a single device or a single host to two devices. The PI3USB3102 offers excellent signal integrity for high-speed signals and low power dissipation. Insertion loss is 1.7 dB and return loss is -16 dB at 2.5 GHz. Power dissipation is 6.6 mW maximum.
Routing of USB 3.2 Gen 1 signals with low signal attenuation between source and sink.
Analog or Digital? |
Analog |
---|---|
Configuration |
1:2 Mux/Demux |
Differential Channels |
4 |
HotInsertion |
0 |
Lanes |
2 |
OtherFeatures |
None |
Rail-to-Rail |
0 |
Signal Type |
Differential |
Single Ended Channels |
4 |
Type |
DPDT |
Voltage |
3.3 |
Something went wrong with your request. Please try again later. If this problem continues, please contact Diodes support for assistance.
A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.
PCN # | Issue Date | Implementation Date | Subject |
---|---|---|---|
PCN-2654 | 2024-02-15 | 2024-04-28 | Device End of Life (EOL) |