Diodes Incorporated
SO 7

Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.

SO-7.png
Back to Active OR-ing Controller

ZXGD3112N7

400V ACTIVE OR-ING FET CONTROLLER

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Description

ZXGD3112N7 is a 400V Active OR'ing MOSFET controller designed for driving a very low RDS(ON) Power MOSFET as an ideal diode. This replaces the standard rectifier to reduce the forward voltage drop and overall increase the power transfer efficiency.

The ZXGD3112N7 can be used on both high-side and low-side power supply units (PSU) with rails up to ±400V. It enables very low RDS(ON) MOSFETs to operate as ideal diodes as the turn-off threshold is only 3mV with ±2mV tolerance. In the typical 48V configuration, the standby power consumption is <50mW as the low quiescent supply current is <1mA. During PSU fault condition, the OR'ing Controller detects the power reduction and rapidly turns off the MOSFET in <600ns to block reverse current flow and avoid the common bus voltage dropping.

Feature(s)

  • Active OR'ing MOSFET Controller for High- or Low-Side PSU
  • Ideal Diode to Reduce Forward Voltage Drop
  • -3mV Typical Turn-Off Threshold with ±2mV Tolerance
  • 400V Drain Voltage Rating
  • 25V VCC Rating
  • <50mW Standby Power with Quiescent Supply Current <1mA
  • <600ns Turn-Off Time to Minimize Reverse Current

Application(s)

  • (N + 1) Redundant Power Supplies
  • Telecom Power Supplies
  • High Voltage Data Centers and Servers
  • Remote Feeding

Product Specifications

Product Parameters

AEC Qualified No
Compliance (Only Automotive supports PPAP) Standard
Supply Voltage VCC (V) 25 V
Drain Voltage V(V) 400 V
Source CurrentISOURCE (A) 2 A
Sink CurrentISINK (A) 5 A
Turn-OffTime (td2) (ns) 400 ns
Turn-OffTime (tf) (ns) 131 ns

Related Content

Packages

Technical Documents

SPICE Model

Recommended Soldering Techniques

TN1.pdf