Diodes Incorporated
SO 8

Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.

SO-8.png
Back to Timer ICs

SA555

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Description

These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the time-delay or monostable mode of operation, the timed interval is control°C by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle can be control°C independently with two external resistors and a single external capacitor. The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground. The output circuit is capable of sinking or sourcing current up to 200mA. Operation is specified for supplies of 5V to 15V. With a 5-V supply, output levels are compatible with TTL inputs. The NE555, SA555 and NA555 are supplied in a small outline 8 pin package (SO-8).

Feature(s)

  • Industry standard part number and specification - Drop in replacement to alternative parts - Vast amounts of free support available including cookbooks and calculators
  • Programmed by external resistors and capacitor - Very simple to use. Allows easy programming into several different modes
  • Application(s)

  • General timing applications
  • Product Specifications

    Product Parameters

    AEC Qualified No
    Compliance(Only Automotive supports PPAP) Standard
    Maximum Frequency (MHz) 0.5
    Maximum Output Rise Time 300 ns
    Supply Current @ VCC = 5V (Output Low) 3 mA
    Supply Current @ VCC = 5V (Output High) 2 mA
    VCC Min (V) 4.5 V
    VCC Maximum Rating 16 V
    Operating Ambient Temperature Range (°C) -40 to 85 °C

    Related Content

    Packages

    Technical Documents

    Recommended Soldering Techniques

    TN1.pdf

    RoHS CofC

    Product Change Notices (PCNs)

    A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

    PCN # Issue Date Implementation Date Subject
    PCN-2512 2021-04-16 2021-07-16 Qualified Additional Assembly & Test (A/T) Site