Diodes Incorporated
SO 8

Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.

SO-8.png
Back to Operational Amplifiers

TLC27L1I

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Description

The TLC27L1 operational amplifier combines a wide range of input offset-voltage grades with low offset-voltage drift and high input impedance. The TLC27L1 is a low-bias version of the TLC271 programmable amplifier. Three offset-voltage grades are available, ranging from the low-cost TLC27L1 (10mV) to the TLC27L1B (2mV) low-offset version. The devices are offered in both commercial and industrial operating temperature ranges.The extremely high input impedance and low bias currents, in conjunction with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs. The devices also exhibit low-voltage single-supply operation, with a common-mode input-voltage range including the negative rail. 

Product Specifications

Product Parameters

Compliance (Only Automotive supports PPAP) Standard
AEC Qualified No
Number of Channels 1
Minimum Supply Voltage (V) 4 V
Maximum Supply Voltage (V) 16 V
Supply Current @ 5V (per Op Amp) (mA) 0.01 mA
Input Offset Voltage typ (mV) 1.1 mV
Input Bias Current typ (nA) 0.0006 nA
Minimum Input Common Mode Voltage (V) V- -0.2 V
Maximum Input Common Mode Voltage (V) V+ -1.0 V
Output Current Source (mA) 15 mA
Output Current Sink (mA) 15 mA
Rail-Rail None
Operating Ambient Temperature Range (°C) -40 to 125 °C

Related Content

Packages

Technical Documents

Recommended Soldering Techniques

TN1.pdf

Product Change Notices (PCNs)

A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

PCN # Issue Date Implementation Date Subject
PCN-2512 2021-04-16 2021-07-16 Qualified Additional Assembly & Test (A/T) Site