AH3582

Description

The AH3582 is a high voltage high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position and level sensing in industrial and consumer home appliances and personal care applications. To support wide range of demanding applications, the design has been optimized to operate over the supply range of 3.0V to 28V. With chopper stabilized architecture and an internal bandgap regulator to provide temperature compensated supply for internal circuits, the AH3582 provides a reliable solution over the whole operating range. For robustness and protection, the device has a reverse blocking diode with a Zener clamp on the supply. The output has an over current limit and a Zener clamp.

The internally pulled-up output can be switched on with either South or North pole of sufficient strength. When the magnetic flux density (B) perpendicular to the package is larger than the operate point (BOP) the output is switched on (pulled low) and is held on until magnetic flux density B is lower than the release point (BRP).

Application

• Position and Proximity Sensing in Consumer Home Appliances, Building Automation, Office Equipments, Cersonal Care and Industrial Applications 
• Open and Close Detect
• Position Detect
• Level Detect
• Flow Meters
• Contact-Less Switches

Features

• Omnipolar Operation 
• High Sensitivity: BOP and BRP of ±40G and ±25G Typical
• Single Open Drain Output with Over Current Limit
• 3.0V to 28V Operating Voltage Range
• Chopper Stabilized Design Provides
• Superior Temperature Stability
• Minimal Switch Point Drift
• Enhanced Immunity to Stress
• Good RF Noise Immunity
• Reverse Blocking Diode 
• Zener Clamp on Supply and Output Pins 
• -40°C to +125°C Operating Temperature
• ESD: HBM ＞ 6kV
• Industry Standard SOT23 and SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) Packages