Diodes Incorporated
3D MSOP 8

Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.

3D-MSOP-8.png
SO 8

Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.

SO-8.png
Back to Power Switches

AP2810A

1.0A High-Side Power Distribution Switch With Enable And Flag

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Description

The AP2810 is an integrated high-side power switch that consists of N-Channel MOSFET, charge pump, over current & temperature and other related protection circuits. The switch’s low RDS (ON), 60mΩ, design easily to meet USB voltage drop requirements. It includes soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in. Under voltage lockout (UVLO) function is used to ensure the device remain off unless there is a valid input voltage present. A Flag output is available to indicate fault conditions to the local USB controller.

Application(s)

  • USB Power Management
  • USB Bus/Self Powered Hubs
  • Hot-plug Power Supplies
  • Battery-charger Circuits
  • Notebooks, Motherboard PCs
  • Product Specifications

    Product Parameters

    Type OCP Switch
    AEC Qualified No
    Compliance (Only Automotive supports PPAP) Standard
    Maximum Continuous Output Current (A) 1
    (MAX) Maximum Current Limit Fixed (A) 2.1
    Adjustable Current Limit No
    Channels 1
    Enable Logic Active High
    Minimum Operating Voltage (V) 2.7
    Maximum Operating Voltage (V) 5.5
    Quiescent Current Typ (µA) 35
    RDS(ON) (VIN = 5V) Typ (mΩ) 70
    Reverse Current Block Yes
    Minimum Power Supply Voltage (V) 2.7
    Maximum Power Supply Voltage (V) 5.5
    Output Discharge Yes
    (TYP) Output Rise Time mS 0.5
    OCP Output Latch Off No
    OCP Flag Yes
    Power Good No
    Operating Ambient Temperature Range (°C) -40 to 85
    Overtemperature Protection Yes
    UL Certificate Yes

    Related Content

    Packages

    Technical Documents

    Recommended Soldering Techniques

    TN1.pdf

    RoHS CofC