1.5A Single Slew Rate Controlled Load Switch
Log in or register to manage email notifications about changes to datasheets or PCNs for this part.
The AP22908 slew rate controlled load switch is a single P-channel MOSFET power switch designed for high-side load-switching applications. The MOSFET has a typical low RDS(ON) of 28mΩ at 3.6V, allowing increased load current handling capacity with a low forward voltage drop. The turn-on slew rate of the device is controlled internally to avoid inrush current.
The AP22908 load switch is designed to operate from 1.08V to 3.6V, making it ideal for 1.2V, 1.8V, 2.5V, 3.3V and 3.6V systems. The typical quiescent supply current is only 0.05μA. The AP22908 is available in the wafer level chip scale 4-pin, X1-WLB0909-4 0.5mm pitch and standard SOT26.
Operating Voltage Range | 1.08 to 3.6 V |
---|---|
Channels | 1 |
Maximum Output Current | 1.5 A |
Typical Quiescent Current | 0.05 µA |
RDS(ON) | 28, 40 mΩ |
Operating Ambient Temperature Range (°C) | -40°C to 85°C °C |
Output Turn-On Delay Time Typ | 110 |
Output Turn-On Rise Time Typ | 105 |
A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.
PCN # | Issue Date | Implementation Date | Subject |
---|---|---|---|
PCN-2531 | 2021-07-30 | 2022-01-29 | Additional Die Revision, Redistribution Layer (RDL), BUMP Sites (SJSEMI and LBS), as well as Assembly/Test (A/T) Site (CAT) |