Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.

AP22800

5V Single Channel Programmable Load Switch

Contact Sales

Description

The AP22800 is an integrated N-channel load switch, which features an adjustable ramp-up and discharge rate that are settable via an

external capacitor and a resistor, respectively. In addition, it incorporates a ‘power good’ output to flag when the switch is

enhanced. The N-channel MOSFET has a typical RDS(ON) of 16mΩ, enabling current handling capability of up to 4A.

The AP22800 is designed to operate from 1.5V to 5.5V making it ideal for 1.8V, 2.5V, 3.3V, 5V voltage rails. The low quiescent supply

current specification of 21μA makes it ideal for use in battery powered distribution systems where power consumption is a concern.

The AP22800 is available in a standard Green U-DFN2116-8 package with an exposed PAD for improved thermal performance and

is RoHS compliant.

Feature(s)

1.5V to 5.5V Input Range
Low Typical RDS(ON) of 16mΩ
Very Low Quiescent Current of 21μA
Adjustable Start-Up and Discharge Rate
Small Form Factor Package U-DFN2116-8 – Footprint of just 3.36mm2
Thermally Efficient Low Profile
Totally Lead-Free & Fully RoHS Compliant
Halogen and Antimony Free. “Green” Device

Application(s)

Integrated Load Switches in Ultrabook PCs
Power Up/Down Sequencing in Ultrabook PCs
Tablets
SSD (Solid State Drives)
Consumer Electronics
Telecom Systems
Set-top Boxes
E-Readers

Product Specifications

Product Parameters

Operating Voltage Range	1.5 to 5.5 V
Channels	1
Maximum Output Current	6 A
Typical Quiescent Current	20 µA
R_DS(ON)	19 mΩ
Operating Ambient Temperature Range (°C)	-40 to 85 °C
Output Turn-On Delay Time Typ	-
Output Turn-On Rise Time Typ	-

Technical Documents

Recommended Soldering Techniques

TN1.pdf

RoHS CofC

RoHSFile

Product Change Notices (PCNs)

A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

PCN #	Issue Date	Implementation Date	Subject
PCN-2554	2021-11-15	2022-02-15	Qualified Additional Assembly & Test (A/T) Sites, Bill of Material (BOM) and updated Data Sheets for Package Outline Dimension Change
PCN-2432	2019-08-09	2019-08-09	Replacement Wafer FAB Source for RDL Process