Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.

SO-8.png

Back to Comparators

ACS393MTR

DUAL DIFFERENTIAL COMPARATORS

Datasheet

Contact Sales

Description

The AS393/393A consist of two independent precision voltage comparators with a typical offset voltage of 1.0mV and high gain. They are specifically designed to operate from a single power supply over wide range of voltages. Operation from split power supply is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. The AS393/393A series are compatible with industry standard 393. AS393A has more stringent input offset voltage than AS393. The AS393 is available in standard DIP-8, TDIP-8, SOIC-8, TSSOP-8 and MSOP-8 packages, AS393A is available in standard DIP-8 and SOIC-8 packages.

Feature(s)

Wide Supply Voltage Range - Single Supply: 2.0V to 36V - Dual Supplies: ±1.0V to ±18V
Low Supply Current Drain: 0.6mA
Low Input Bias Current: 25nA (Typical)
Low Input Offset Current: ±5.0nA (Typical)
Low Input Offset Voltage: 1.0mV (Typical)
Input Common Mode Voltage Range Includes Ground
Differential Input Voltage Range Equals to the Power Supply Voltage
Low Output Saturation Voltage: 200mV at 4mA
Open Collector Output

Application(s)

Battery Charger
Cordless Telephone
Switching Power Supply
DC-DC Module
PC Motherboard
Communication Equipment

Product Specifications

Product Parameters

Compliance (Only Automotive supports PPAP)	Standard
AEC Qualified	No
Minimum Supply Voltage (V)	2 V
Maximum Supply Voltage (V)	36 V
Supply Current @ 5V (per Op Amp) (mA)	0.4 mA
Input Offset Voltage (Typ/Max)	4 to 8 mV
Input Bias Current typ (nA)	150 nA
Minimum Input Common Mode Voltage (V)	0 V
Maximum Input Common Mode Voltage (V)	VCC -1.5 V
Output Current Sink (mA)	16 mA
Number of Channels	2
Operating Ambient Temperature Range (°C)	0 to 70 °C
Output Type	Open Collector

Technical Documents

Recommended Soldering Techniques

TN1.pdf